Saturday, April 20, 2013

front-only Maternity Jeans Conversion tutorial

So, I hit 31 weeks this week.  Lucky for me, I've only juuuuuuust finally been unable to do the whole hair-elastic-through-the-button-hole trick for the last couple weeks.  I was hoping that warm weather would indeed shine on us soon so that I could switch from my usual preggo-uniform of black yoga pants and pajama bottoms to my stash of summer/spring elasticized skirts.  I ot one day in, but alas, it's back to rain and chill (hate.)

As a result, I decided I'd have to indeed make myself up a pair of maternity jeans.  I found these at Goodwill


on half-off pink day for $2.50 OTD, a steal in my book considering they made my butt NOT look preggo/mommish, fit in the thighs, AND appealed to my vanity by sporting a lovely size 3/4 tag (I even managed to actually button them up, albeit not comfortably)!!!

The fading/cat whisker thing isn't exactly my thing, but hey, they were cheap and fit, and I could have done a lot worse =)


I've seen tutorials for converting regular pants/jeans into maternity wear before (such as this) but this is the one that inspired me.  I wanted a pair of jeans that I could still wear a belt with so that the band was a leeeetle more inconspicuous.  So here is my version of maternity jeans  =)





Supplies needed:

  • good scissors
  • a seam ripper
  • sewing machine
  • 2 in. wide elastic, enough to span side to side
  • a pair of jeans that fit well (you can get them up and on, but can't button them)
  • coordinating thread
  • heavy duty jeans thread (optional, if you are adding front belt loops back on)
  • elastic/stretch sewing machine needle (optional)
  • a length of stretch knit fabric to cover the band, long enough to reach from side to side and wide enough to overlap the band, so about 5 inches
  • tape measure

1. Grab your seam ripper.  Because I wanted to be able to re-add on the front belt loops after I got done installing the elastic, I removed these first by picking out the stitching holding them on:






 You don't have to do this part if you don't want to add the belt loops back on =)

2. The tutorial that I based mine on instructs you to just cut out the part of the waistband out that you want to replace with elastic, leaving enough fabric behind for seam allowance.  I think this is kind of bulky and not the easiest to sew.  I used my handy-dandy seam ripper to start separating the waistband from the front of the jeans, stopping right before the two side belt loops, as shown:



I like this because you have a nice line to go by where the wash gets darker on the material to use as a reference for where to pin and sew  =)

3. Okay, so after you do that, cut off the band, leaving at least half an inch in front of  each side belt loop, enough to give you something to sew the band to.






4.  The zipper.





Be VERY aware of the zipper!  Because you used a seam ripper to remove the band, the stitches are still intact that hold the zipper in.  After you're done with this project, you'll still be able to zip and unzip, although it'll be pretty pointless =)  When you sew the elastic to the band in the next steps, make sure to not sew over the teeth.  Also, see that stud by the pocket?  Don't get to close to those, either  =)

5. Now, measure from cut to cut, as so....






....and use this length to cut your 2" elastic.  You can cut shorter if you'd like to give a tighter fit; you'll just have to stretch the elastic a little as you sew =)  I plan on using these through my third trimester, so I want as much as stretch as I can get! Plus, if you re-add the belt loops, you can use a belt to hide the elastic/ give a little extra holding-up support.


6.  Pin the elastic to your jeans, with the elastic on the inside and leaving about half an inch overlap on either side to stitch to the jean material.  Make sure the top edge of the elastic lines up exactly with the top of the band on either side.



7. Time to sew!  I used the largest, strongest needle I had for my machine, but you can use a needle specially for denim, or even a regular needle might work, depending on the thickness of your denim.  These were pretty thick, so I had some moments where I got stuck and had to do it over.  Good luck to you!!!

Because we're sewing elastic, I chose to sew with a zig-zag stitch instead of a straight stitch to allow for the elastic to stretch a little.  I didn't use a straight stitch at all for this entire project, other than sewing the belt loops back on.






I used a width of about 4, and although the picture indicates a length of two, it was changed to a little closer to 1 before I started sewing.  This isn't really that important, but you don't want the stitch length to be too long because it won't be strong enough, and you don't want the width too short or it won't give you the stretch you need.


Start on the left side, sewing down the band and back stitching at the beginning.


I didn't sew exactly along that line we talked about at this point,  I sewed a little inside it, so that when I sew the knit later, I can follow that line and not worry that a little of the previous stitching will show through.  Pivot your machine at the corner and continue to sew down the length of the band.


When you get to the fly, make sure (again) that you don't sew over the zipper.



If you have to, you can pivot your sewing up towards the elastic a little to make sure you don't hit it.  It won't effect the finished look.

8. After finishing up the right side the same as the left, back stitch and try the jeans on to make sure they fit:

A nice juicy shot of my big ol' belly and it's linea negra


9. If everything looks good and you don't have to fix anything, go grab your stretchy knit (I used black):

Mine is probably w-a-y too short for this project, but I had a decent scrap left from when I made my work pants so I just used it anyway.  I DON"T recommend this,as there was a LOT of pins popping out, and extra work involving keeping everything lined up.

Although I didn't follow these part of the directions, you really should (see above caption).  Make sure it is about five inches wide and a few inches short of how long your elastic was (You'll want to stretch it as you pin so that you don't get any bumps or lumps when sewing).


 Overlap both side edges as so, to create a finished seam to cover the jeans material when you overlap the band.


With right sides together, pin the knit fabric to the bottom of the new elastic band, with just enough overlap on either side to cover the raw edge and previous stitch line.  I pin on each side first and then do the middle, working my way back to the outsides in order to get a consistent amount of stretch throughout the entire band.


I should look something like this:


Only not as painful looking because you actually used the right length of fabric for your pants  =)

10. Sew the fabric to the band....


...making sure you remember where those pocket studs were (or you can forget like I did and bend [or break] your needle like I did =/  )

sad needle  =(

 When you're done it should like this, only better:

bottom pins are there for photographing purposes, only =)
11. Next, fold over your knit to cover the band, making sure the sides cover up the elastic/stitching/raw edge of the jeans part of the band.....


....like this....and pin it in place....


 ....making sure it covers the elastic adequately in the back (the elastic will be scratchy if you leave part of it uncovered on the back side)....


....then sew it on, starting at the top edge by the belt loop, pivoting at the corner, then going along the front to finsh up the right side in the same way as the left.  You should still be using a zig-zag stitch.







Your pants should look something like this now =)

12. To add the belt loops back on, Position them over their original location.  You can try to pin them on, or use embroidery floss and a needle to put a basting stitch at the top and bottom since they're so thick and tend to bend pins to keep them in place.  I also didn't machine stitch them back on, I used heavy jeans thread to hand stitch them back in place (This is after I frustratingly broke a different needle while attempting to machine stitch them back on.  Your call)

Ta-da, you're done!




You've got some pretty fancy, high-quality maternity jeans, that cost you next to nothing and don't sport some mom-brand label  =) 

No comments:

Post a Comment

Thanks for leaving a comment! Don't forget to change your email settings so I can message you back if I so choose =)